Applying a DTF transfer is easy! All you need is a heat press, a DTF transfer, and your garment of choice. Just follow these steps for the best results:

1. Position the Transfer: Place the DTF transfer design-side down on the garment where you want the design to appear.
2. Heat Press Settings:

• Temperature: 300°F 
• Time: 10-15 seconds
• Pressure: Medium

1. Peel the Film: Let the garment cool down slightly to a warm touch, then carefully peel off the transfer film.
2. Optional: Re-Press for Durability: To ensure longevity, cover the transfer with Teflon (for shiny look) or parchment paper (for matte look)and press again for 5 seconds.

Your garment is now ready with a vibrant and long-lasting print!

Note-If you are using Cricut Easy press 

Heat Press the transfer with these settings : 

- Apply hard pressure
- 320 degrees for 15-20 seconds.

If you are using Home Iron- use these setting

Iron the Garment
Apply one of these settings to suit your garment type if the iron heat settings is adjustable.

🚨 Be sure to sufficient pressure for best results! 🚨

Temperature / Time Settings:

• Cotton: 325F / 20 seconds
• 50/50: 300F / 15 seconds
• Tri-Blend: 275F / 15 seconds
• Poly: 275F / 10 seconds
• Hats (poly): 250F / 8-10 se